Naturally , before you start creating the lose, you must have Pavilion Plans 14×16 DIY Free Outdoor Projects. It makes the construction easier and permits us to easily determine the number of developing materials you will need with your Pavilion Plans 14×16 DIY Free Outdoor Projects.

Pavilion Plans 14×16 DIY Free Outdoor Projects

shed roof pavilion plans

Pavilion Plans 14×16 DIY Free Outdoor Projects

Pavilion plans DIY 14’x16′ pavilion. Plans include free PDF download, shopping list, cutting list, and step-by-step illustrated instructions.

Pavilion Plans 14×16 – Overview

Pavilion Plans 14×16 – Material List

Shopping List

Shopping List

(H) 12 – 1/2″ plywood – 4’x8′ sheet

Cutting List

Cutting List

F – 18 – 2×6 – 11′ 1 7/16″

H – 12 – 1/2″ plywood – 4’x8′ sheet cut to size

Cut eight 6×6’s to 12′ long (A), square the area and install as showing above. Poles are buried 2′ deep.

Cut two 6×6’s to 16′ long (B). Notch and install as shown above, pre-drill all holes and secure with 4 1/2″ screws.

Cut two 6×6’s to 16′ long (C). Notch 5 1/2″ x 2 3/4″ deep, install as shown above, pre-drill all holes and secure with 4 1/2″ screws.

Cut two 6×6 to 5′ long (D). Cut one 6×6 to 16′ long (E) and notch 5 1/2″ x 2 3/4″ deep as shown in illustration above. Pre-drill all holes, install as shown on illustration above using 4 1/2″ screws.

Cut eighteen 2×6’s to 11′ 1 7/16″ long (F) for the rafters. See illustrations below for details.

Cut the ends of the 2×6 rafters as shown on illustration above.

Cut one end of the rafter as shown above.

Cut the opposite end of the rafter as shown on illustration above.

Install the rafters 24″ O.C. pre-drill all holes and secure with 3 1/2″ screws.

Cut sixteen 6×6’s to 3′ long (G), cut 45-degree angle cuts on both ends. Pre-drill all holes and install as shown on illustration above using 4 1/2″ screws.

Cut to size and install the roof deck using 2″ nails.

Install shingles. Illustration above shows pavilion with 2×4 railing.

Leave a Reply

Your email address will not be published. Required fields are marked *