Naturally , before you start creating the lose, you must have Insulated Cat House Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq. It makes the construction easier and permits us to easily determine the number of developing materials you will need with your Insulated Cat House Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq.

Insulated Cat House Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq

insulated cat house plans,build an insulated cat house,how to build cat house

Insulated Cat House Plans

This step by step diy project is about insulated cat house plans plans. I have designed this outdoor cat house so you can protect your favorite furry pets from the elements. The cat house is built on a platform, so the cats can climb it and also be protected from other animals. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

Insulated Cat House Plans

Building an insulated cat house

  • A – 2 pieces of 2×4 lumber – 24″ long, 3 pieces – 25″ long FRAME
  • B – 2 pieces of 3/4″ plywood – 24″x28″ long FLOOR
  • C – 2 pieces of polystyrene foam sheet – 9 3/4″x25″ long INSULATION
  • D – 4 pieces of 2×4 lumber – 16″ long LEGS
  • E – 5 pieces of 2×2 lumber – 11″ long, 1 piece – 24″ long, 1 piece – 15″ long, 1 piece – 3″ long, 1 piece – 6″ long FRONTWALL
  • E – 2 pieces of 2×2 lumber – 24″ long, 3 pieces – 11″ long BACK WALL
  • E – 2 pieces of 2×2 lumber – 17″ long, 3 pieces – 11″ long 2xSIDE WALLS
  • G – 2 pieces of 1/2″ plywood – 14″x20″ long, 2 pieces – 23 3/4″x25″ long WALLS
  • H – 4 pieces of 2×2 lumber – 20″ long RAFTERS
  • 3 piece of 2×4 lumber – 8′
  • 1 piece of 3/4″ plywood – 4’x8′
  • 1 piece of 1/2″ plywood – 4’x8′
  • 6 pieces of 2×2 lumber – 8′
  • polystirene foam sheets
  • 1 1/2″ brad nails, 2 1/2″ screws, 1 5/8″ screws
  • wood filler , wood glue, stain/paint

One day

Leave a Reply

Your email address will not be published. Required fields are marked *