Free Tiny House Plans
This step by step diy woodworking project is about free tiny house plans. The project features instructions for building a 8×12 shed tiny house. If you are looking for plans for a simple and cheap tiny house, you should check our plans. Make sure you take a look over the rest of plans to see alternatives and more projects for your garden.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.
Projects made from these plans
Free Tiny House Plans
Building a tiny house
- A – 2 pieces of 2×6 lumber – 96″ long, 2 pieces – 93″ long, 2 pieces – 141″ long, 2 pieces – 138″ long, 8 pieces – 90″ long JOISTS
- B – 4 pieces of 4×4 lumber – 144″ long SKIDS
- C – 3 pieces of 3×4 plywood – 48″x96″ long FLOOR
- D – 8 pieces of 2×4 lumber – 81 1/2″ long, 1 piece – 89″ long, 1 piece – 96″ long, 2 pieces – 27 1/2″ long, 1 piece – 34″ long FRONT WALL
- E – 7 pieces of 2×4 lumber – 81 1/2″ long, 2 pieces – 89″ long, 1 piece – 96″ long BACK WALL
- F -2 pieces of 2×4 lumber – 144″ long, 1 piece – 137″ long, 12 pieces – 81 1/2″ long SIDE WALL
- G – 2 pieces of 2×4 lumber – 144″ long, 1 piece – 137″ long, 10 pieces – 81 1/2″ long, 8 pieces – 34″ long, 8 pieces – 6″ long, 4 pieces – 40″ long, 8 pieces – 28 1/2″ long SIDE WALL
- H – 4 pieces of 3/4″ plywood – 48″x90 3/4″ long, 6 pieces – 48″x95 1/4″ long SIDING
- 4 pieces of 4×4 lumber – 12′
- 4 pieces of 2×6 lumber – 8′
- 4 pieces of 2×6 lumber – 12′
- 56 piece of 2×4 lumber – 8′
- 6 pieces of 2×4 lumber – 12′
- 13 pieces of 3/4″ plywood – 4’x8′
- 1000 pieces of 1 5/8″ screws
- 1000 pieces of 2 1/2″ screws
- wall underlayment
Hammer, Tape measure, Framing square, Level
Miter saw, Drill machinery, Screwdriver, Sander
Safety Gloves, Safety Glasses
How to build a 8×12 tiny shed plans
Building the rim joists
The first step of the project is to build the rim joists for the tiny house. Build the components from 2×6 lumber. Drill pilot holes through the components and lock them together with 2 1/2″ screws. After building the tow frames, align the edges and lock the together with 2 1/2″ screws.
Make sure the corners are square and check if the diagonals are perfectly equal.
Fitting the joists
Next, fit the intermediary joists to the frame, as shown in the diagram. Place the joists equally-spaced and use appropriate hardware to lock them into place tightly. Check if the corners are square before assembling the frame together.
Attaching the floor sheets
Attach the 3/4″ plywood sheets to the floor frame, as shown in the diagram. Leave no gaps between the sheets and secure them with 1 5/8″ screws, every 8″ along the joists.
Fitting the skids
In order to protect the floor from moisture, you need to attach 4×4 skids under the floor frame. Place the skids equally-spaced and lock them to the joists using hardware. Make sure the joists are rigid before continuing the project. In addition, it would be a good idea to remove the vegetation layer and to compact a 2″ layer of gravel before laying the floor frame. Use a spirit level to make sure the surface is horizontal.
Building the side wall with windows
Build the side wall with window openings. Cut the components from 2×4 lumber, after taking the measurements shown in the diagram. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Place the studs equally-spaced. In addition, enhance the rigidity of the frame by placing double headers. The double top plates will also add strength to the construction.
Framing the windows
As you can easily notice in the diagram, framing the windows requires a good preparation, as you need to add supports to the top, bottom and sides.
Building the double headers
When assembling the double headers, you need to place 1/2″ plywood between the components. Insert 2 1/2″ screws through both sides to enhance the rigidity.
Building the side wall
Next, you need to build the opposite wall for the tiny house. Cut the components from 2×4 lumber. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Make sure the corners are square.
Fitting the side walls
Lift the frames and fit them to the floor of the shed. Use temporary braces to lock the frames to the floor after plumbing the walls with a spirit level. Drill pilot holes through the bottom plate and insert 3 1/2″ screws into the floor.
Building the back wall
Build the back wall in the same manner described above. Make sure the corners are square and place the studs equally-spaced for a professional result.
Building the front wall
Building the front wall is similar, but you need to frame the door opening as well. Also place a 34″ long 2×4 to the top of the opening if you install a regular 80″ door.
Assembling the frame of the tiny house
Fit the front and back walls to the floor of the tiny house, as shown in the plans. Lock the adjacent walls together by inserting 2 1/2″ screws through the studs. Make sure the corners are square.
Attaching the walls – Front
Continue the project by attaching the 3/4″ plywood sheets to the front wall. Make cuts to the plywood sheets to fit around the door openings. Use 1 5/8″ screws or nails to lock the sheets to the studs, every 8″. As you can see in the diagram, you need to leave the top plate exposed. Therefore, align the sheets with the bottom edge of the joists.
Fitting the walls – Back
Fit the 4×8 plywood sheets to the back wall of the tiny house. Align the bottom of the sheets to the bottom edge of the joists. Use 1 5/8″ screws or nails to secure the sheets to the frame.
Fitting the walls – Side
Fit the sheets to the side of the tiny house shed. As you can notice in the diagram, you need to align the bottom of the sheets to the bottom of the joists. Leave no gaps between the sheets and secure them to the frame using 1 5/8″ screws/nails.
As you can notice in the diagram, you need to make notches to the top of the sheets. Use a circular saw and a chisel to create the notches for the rafters.
Fitting the walls – Side with windows
Continue the project by attaching the sheets to the side with the window opening. Align everything with great care and secure the sheets into place with 1 5/8″ screws/nails.
Side with windows sheets
Use the information from the diagram to cut the sheets. Make notches for the rafters and for the window openings.
Tiny house – Back View
Make sure you check out part 2 of this project, if you want to learn how to build the roof for the tiny house. After you build everything and lock them together, the tiny house should look similar to the one in the image.
Tiny house plans
This 8×12 tiny house is ideal if you want a simple and cheap project. You can get the job done by yourself in just a few weekends, if you follow our plans and invest in quality materials. Afterwards, you need to take care of the interior of the tiny house.
8×12 Tiny house plans
This tiny house has an unique appeal and is ideal if you have a limited space, budget or time.
Top Tip: Check out the rest of the project, if you want to learn more about building the roof of the tiny house.
This woodworking project was about 8×12 tiny house plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.