Naturally , before you start creating the lose, you must have 20×20 King Post with Shed Roof Plan – Timber Frame HQ. It makes the construction easier and permits us to easily determine the number of developing materials you will need with your 20×20 King Post with Shed Roof Plan – Timber Frame HQ.

20×20 King Post with Shed Roof Plan – Timber Frame HQ

20×20 shed roof plans

20×20 King Post with Shed Roof Plan

Enclose this entire king post plan for a small cabin, or leave the shed roof area open for a rocking chair porch. The king post area is a generous 15 feet wide by 20 feet deep, with the 5 foot by 20 foot shed roof in addition. The main area has a 10/12 roof pitch, while the shed roof has a 3/12 pitch.

The package includes (26) PDF pages, in 8.5 x 11 format, full of renderings, elevations, sections, individual piece drawings and a complete timber list, all for immediate download.

Download Sample Plan

Important Information:

Purchaser agrees that the use of the plan is for the construction of one house or frame only*, and that the plan or any part of it will not be reproduced by any means without the written consent of the copyright owner.

Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering and specifications that may be required in the municipality in which it is to be built. Plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to meet local code and engineering requirements.

Customer understands that the following conditions in your specific area may require additional engineering:

  1. Wind / hurricane / tornado
  2. Seismic / earthquake
  3. Heavy snow
  4. Flood potential
  5. Soil instability
  6. Timber Frame Engineering

Customer understands that HVAC, Plumbing & Electrical will not be included in all plans.
Purchaser agrees that the use of the plan is for the construction of one house or frame only*, and that the plan or any part of it will not be reproduced by any means without the written consent of the copyright owner.

12 thoughts on “20×20 King Post with Shed Roof Plan”

I like the overall look and design of this frame but I need a little more length. Would it be possible to make the frame 24 feet deep so the main area is 15×24 with out an additional bent or sizing up the timbers too much?

Thanks for your questions. That would be fairly simple change you can make in the field. You will just need to increase the length of the purlins, ridge and other timbers running that direction by 24″ in both bays.

I’d like this for a sugar shack. I would like to raise the roof by 4′?, leaving the sills at 7 or 8′ and install a floor in front, remove the ridge at the back for the cupola. Is this a simple revision or does it require some head scratching and redrafting?

I think those changes are easy enough not to require any redrafting of it. If you have any questions along the way drop up a line and we will do our best to help out.

Hi there, I love the design but am thinking I may only have space for a 15’ x 20’ structure. How difficult would it be to reduce the width by 5 feet, resulting in a 10ft wide cabin and 5 ft shed? I imagine the roof pitch would have to change; would it be 12/12 then?

The roof pitch can stay the same. This would revision will need to be completed as custom plan, please contact us for this service.

Do you have a timber list you could share for this plan? Thanks.

Steve, here is the timber list Timber list

Hi Brice,
Is this a design that can be built and stood up by a group of strong guys without a crane?
How would I attach it to a concrete slab to use as a pavilion?
Mike

Another question:
Why are there no braces running on the 20′ side of the main structure?

I am looking to build a wood working shed. This plan is all most prefect for what I am looking for, but can 2 of the knee braces be removed at the end to allow for a 2 door, full size barn door opening? I can adjust for the other sizes since I am cutting my own wood.

Leave a Reply

Your email address will not be published. Required fields are marked *