Naturally , before you start creating the lose, you must have 12×12 Shed with Porch Roof Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq. It makes the construction easier and permits us to easily determine the number of developing materials you will need with your 12×12 Shed with Porch Roof Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq.

12×12 Shed with Porch Roof Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq

how to build a shed with porch roof,building a shed with porch roof,building the roof of a shed with porch

12×12 Shed with Porch Roof Plans

This step by step diy project is about 12×12 gable shed with porch roof plans. This gable shed roof has a 5:12 pitch and generous overhangs on all sides. Make sure you check the local building codes and make adjustments to comply with the local regulations. This shed roof is super easy to build, if you follow my diagrams with attention. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look.

Projects made from these plans

12×12 Shed with Porch Roof Plans

Building a shed with porch

  • H – 1 piece of T1-11 s >3xSIDING
  • I – 2 pieces of 2×4 lumber – 88″ long, 1 piece – 144″ long, 2 pieces – 17″ long, 1 piece – 26 1/4″ long 15xTRUSS
  • I – 2 pieces of 3/4″ plywood – 42 1/2″x68 1/2″ long CEILING
  • J – 4 pieces of 2×4 lumber – 88″ long, 7 pieces – 8 1/2″ long 2xOVERHANG
  • K – 2 pieces of 3/4″ plywood – 10 1/2″x80″ long, 2 pieces – 12″x80″ long, 4 pieces – 48″x96″ long, 4 pieces – 40″x48″ long, 2 pieces – 40″x96″ long ROOF
  • L – 2 pieces of 1×6 lumber – 214 1/2″ long, 4 pieces – 89″ long TRIMS
  • M – 300 sq ft of tar paper, 300 sq ft of asphalt shingles ROOFING
  • 3 piece of T1-11 siding – 4’x8′
  • 53 pieces of 2×4 lumber – 8′
  • 15 pieces of 2×4 lumber – 12′
  • 2 pieces of 1×6 lumber – 18′
  • 4 pieces of 1×6 lumber – 8′
  • 11 pieces of 3/4″ plywood – 4’x8′
  • 300 sq ft of tar paper, 300 sq ft of asphalt shingles
  • 8d nails, 2 1/2″ screws, 3 1/2″ screws
  • wood filler , wood glue, stain/paint

One week

  • PART 1: 12×12 Shed with Porch Plans
  • PART 2: 12×12 Shed with Porch Roof Plans
  • PART 3: 12×12 Shed with Porch Door Plans

Building a 12×12 gable shed roof plans

The first step of the project is to build the trusses for the 12×12 shed with porch. As you can easily notice in the diagram, you need to build the rafters from 2×4 lumber. Cut the rafters at the right dimensions and angles using a saw. Lay the rafters on a level surface and align the edges with attention. Leave no gaps between the rafters.

Next, you need to build the supports that will reinforce the rigidity of the trusses. Fit 1/2″ plywood over the joints and align the edges. Insert 1 5/8″ screws to lock the gussets into place tightly.

Fitting the trusses

Fit the trusses to the top of the shed. Plumb the trusses vertically and place the every 16″ on center. Use rafter ties to lock the trusses into place tightly.

Gable end panels

Fit T1-11 siding panels to the gable ends. Mark the cut lines on the panels and then lock them into place with 6d nails. Leave no gaps between the panels.

Next, you need to assemble the overhangs for the shed. Drill pilot holes through the rafters and insert 2 1/2″ screws into the blockings.

Fit 3/4″ plywood sheets to the porch ceiling. Align the edges with attention and leave no gaps between the sheets. Insert 1 5/8″ screws, every 8″ along the trusses, for a professional bond.

Fitting the overhnags

Fit the overhangs to the front and back of the shed. Align the edges, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Fitting the roofing sheets

Cut the sheets for the roof from 3/4″ plywood and then fit them to the top of the shed. Align the edges with attention, drill pilot holes and insert 1 5/8″ screws, every 8″ along the rafters.

Side roof trims

Fit the 1×6 trims to the sides of the roof. Align the trims with attention and insert 2″ nails.

Front and back roof trims

Fit the 1×6 trims to the front and back of the roof. Align the edges and insert 2″ nails, every 8″ along the framing.

Fitting the roofing

Cover the roof with tar paper and then install the asphalt shingles. Make sure you also install the appropriate drip edges, so you can seal the shed roof. Read the manufacturer’s instructions for a tight fit. Alternatively, you could also install metal sheets.

Free 12×12 shed with porch plans – Free DIY Plans

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. Moreover, check out PART 1 of the shed, so you learn how to build the frame of the shed. Check out PART 3 to learn how to build the double side doors, the front door and how to fit the decorative trims.

This woodworking project was about 12×12 gable shed with porch roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

Leave a Reply

Your email address will not be published. Required fields are marked *