10×14 Backyard Shed Plans
Emailed Plans: $19.99
(8 1/2″ x 11″ Emailed PDF
Postal Mailed Plans: $25.99
(8 1/2″ x 11″ Postal mailed)
All Our Shed Plans Feature:
FREE – How To Build A Shed eBook included with every shed plans purchase.
Cost Effective – Our shed plans are designed to make your shed simple and inexpensive to build.
Easy To Build From – Professionally drawn with step by step instructions to show both an old pro or a first time framer how to build a shed. (see the plans example below).
Start Now – Instant download – The shed plans are emailed to you when you purchase so you can start immediately. We use the free PDF file format so you can print them on your home printer or we can postal mail them to you.
Materials List – Easily get bids and use the list numbering system to know what part goes where.
The 10×14 storage shed plans include:
6′-7″ wall height – The 6′-7″ wall height allows a home built doors to go on any wall and reduces the amount of siding and labor needed to build the shed.
Home Built Doors – Plans are included for your strong sandwich construction home built doors.
Multiple Door Options – Drawings explaining how to build the door on the end or sides of the shed.
5 Foundations – Skid, concrete slab, poured concrete pier, concrete block pier, precast pier.
10×14 Backyard Shed Plans Include The Following:
Options: Plans include options to put the door on the end or side of the shed.
Materials List: Use the included materials list to get pricing and to simplify the ordering of materials.
5 Foundations: There are 5 different foundations are included in the plans; 6×6 Wood skid, Concrete slab, Concrete Block Pier, Poured Concrete Pier and Precast pier.
Floor: 2×8 floor joists with 3/4″ floor sheathing.
Walls Framing: 2×4 framing at 16″ on center with a double top plate, just like a home is framed.
Wall Height: The shed wall height is 6′-7″. This wall height will accomodate the home built doors. If you want factory built doors see our 10×14 Gable Tall shed plans.
Siding:T1-11 siding or similar 4’x8′ wood or cement panel siding is specified but you can use any siding you like.
Roof: The roof is framed using 2×4’s to build the trusses. It is sheeted with 1/2″ O.S.B. The plans give you the dimensions and cut angles so you can build the roof rafters on the ground and then put them up on the top plates.
Roof Pitch: 4/12, this means that for every 4 inches of rise there is 12 inches of run horizontally.
Roof Overhang: 4″ on the sides and 1″ on the front and back.
Roofing: 25 year asphalt shingles
Trim: 1×3 and 1×6 wood, masonite or cement trim materials are used to finish the corners, roof eves and facia.
Floor Load: 50 pounds per square foot for framed floors. This is the same floor load rating used in building homes.
Roof Snow Load: 40 pounds per square foot. This is more than adequate for most areas. If you live in an area with a high snow load you should check with your local building department for your local snow load. Contact us and we can specify stronger roof framing.