Naturally , before you start creating the lose, you must have 10×10 Gambrel Shed Roof Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq. It makes the construction easier and permits us to easily determine the number of developing materials you will need with your 10×10 Gambrel Shed Roof Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq.

10×10 Gambrel Shed Roof Plans, MyOutdoorPlans, Free Woodworking Plans and Projects, DIY Shed, Wooden Playhouse, Pergola, Bbq

how to build a 10×10 barn shed roof,building a 10×10 barn shed roof

10×10 Gambrel Shed Roof Plans

This step by step diy project is about 10×10 barn shed roof plans. This article is PART 2 of the 10×10 barn shed, where I show you how to assemble the trusses and how to make the small storage loft. Make sure you check out the rest of the project, so you learn how to build the frame of the shed and how to make the double front doors. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

10×10 Gambrel Shed Roof Plans

  • G – 36 pieces of 2×4 lumber – 46″ long, 27 pieces of 1/2″ plywood – 5 1/2″x11″ long RAFTERS
  • H – 4 pieces of 2×6 lumber – 120″ long BOTTOM RAFTERS
  • I – 1 piece of 3/4″ plwyood – 40 3/4″x96″ long, 1 piece – 40 3/4″x11 1/2″ long LOFT
  • J – 4 pieces of 2×4 lumber – 42″ long, 4 pieces – 52″ long SUPPORTS
  • K – 4 pieces of T1-11 s >SIDING
  • L – 8 pieces of 2×4 lumber – 46″ long, 20 pieces – 8″ long 2xOVERHANG
  • M – 4 pieces of 3/4″ plywood – 46″x88 long, 4 pieces – 32″x46″ long, 4 pieces – 11 1/2″x46″ long ROOF
  • N – 200 sq ft of tar paper, 200 sq ft of asphalt shingles ROOFING
  • O – 8 pieces of 1×6 lumber – 46 1/2″ long TRIMS
  • 34 pieces of 2×4 lumber – 8′
  • 4 pieces of 2×6 lumber – 10″
  • 5 pieces of T1-11 siding – 4’x8′
  • 7 pieces of 3/4″ plywood – 4’x8′
  • 4 pieces of 1×6 lumber – 8′
  • 1 piece of 1/2″ plywood – 4’x8′
  • 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
  • 4d nails, rafter ties
  • wood filler , wood glue, stain/paint
  • 200 sq ft of tar paper, 200 sq ft of asphalt shingles

One day

Leave a Reply

Your email address will not be published. Required fields are marked *